have a few bitcoins on, the hard drive is so old it has an issue and im trying to remove the screws from it so I can get into it, but they wont come off they are like stripped or something, any idea how i can saw the top off?
Use a Dremel and drill them out
Use a drill to drill out the screws
Like this https://www.amazon.com.au/Dremel-Attachments-45-Accessories-5000-35000rpm/dp/B075F7LYMF/ref=asc_df_B075F7LYMF/?tag=googleshopmob-22&linkCode=df0&hvadid=463552687168&hvpos=&hvnetw=g&hvrand=12501780930479070901&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=1000184&hvtargid=pla-421299792189&psc=1
You can't do this in a normal environment. It need to be in a clean room. You need to have a professional restore it.
The question is what to expect to find after that. You cannot just plug & play 😅 you could try to find a functional electronic board, but has to match the same with the right firmware. If the head has a problem or the surface, it’s nearly impossible without a professional rescue-surface. Even for them if it’s damaged too hard. Did that for my customers many times, you have to be very careful, the damage would be irreparable 😅😅
Обсуждают сегодня